Create a PIN or register a card to release prints

Modified on Thu, 22 Sep 2022 at 02:58 PM

This article is for the following schools, to add a printer on a system without Printix, follow this article


You will need to create a PIN to print your documents, this is a one time setup for staff - please visit the relevant address below to access the portal described in these instructions. If you don't have a card, you will need to set up an ID code:


  1. Sign in using the correct link below, choose sign in with Microsoft
  2. Select Menu , and Cards and codes
  3. Select Create to get a PIN code.
  4. Enter PIN code (4-digits) and select Save.
    • Select Reset and enter a new PIN code to replace the old one.
    • Select Delete to delete PIN code.


Bantock Primary School
bantock.printix.net
BlueCoat Academy
bluecoat.printix.net
Concero UK Ltd
concero.printix.net
Mayfield Prep School
mayfieldprep.printix.net
Perry Hall MAT
perryhallmat.printix.net
Riverhill Federation
rotherhithe.printix.net
St Hugh's
st-hughs.printix.net
St Martin's MAT
smartmat.printix.net
Vaughan Primary School
vaughanprimaryschool.printix.net
Walkwood Middle School
walkwood.printix.net


Register card at printer

  1. Present the card you want to register to the printer’s card reader.

  1. As it is an unknown card, you will be presented with a 6-digit Card registration code (Example 348364).
    • The code is valid for 1 hour.
  1. Use the camera on your phone or tablet to scan the QR code shown on the printer’s touchscreen. You may be asked to sign in to Printix App. You can also register the card without a phone by writing down the 6-digit code so you can enter it in step 8.
    Scanning the QR code will open Printix Appand register the card.
    • With iOS/iPadOS 11 or later, you can use the camera app to scan the QR code.
    • With Google App installed on your Android phone or tablet, you can activate Google Screen search to scan the QR code.
    • If your QR Scanner App (not part of Printix) offers you to open the link in a browser, then choose this.
  1. Select Close.

If you did not scan the QR code, then proceed on your computer, phone, or tablet as follows:

  1. Open Printix App.

  1. Select Menu , and Cards and codes .
  2. Select Register card.
  3. Type the 6-digit code you obtained in step 3 and select Save. In the native Printix App for Android and iOS, you can also select Scan  and then point the camera to the QR code.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article